陈俊锋

来源:bat365官网登录入口
发布时间:
2023-05-06
浏览量:


姓名

陈俊锋

学科

材料科学与工程

联系方式

E-mailchenjunfeng@fzu.edu.cn

个人简历

2001年-2005年,哈尔滨工业大学金属材料工程专业学习,工学学士

2005年-2008年,哈尔滨工业大学材料学专业,工学硕士。

2008年-2013年,哈尔滨工业大学材料科学与工程专业,工学博士。

2010年-2012年,美国俄亥俄州州立大学材料科学与工程系访问学者。


2013年-2022年,bat365官网登录入口,副教授/博士生导师

2023年-至今,bat365官网登录入口,教授/博士生导师


社会兼职

国家自然科学基金委通讯评议专家,机械工程学会材料分会理事,机械工程学会热处理分会理事,中国热处理协会教育培训工作委员会副主任委员,福建省机械工程学会理事,福州市创新创业导师

荣誉称号

旗山学者,bet356官网手机app杰出青年励志奖

教学情况

为本科生讲授“热处理原理”、“材料制备与加工”和“科研素养与创新实践”等专业基础课程。现主持福建省教改项目2项,省级精品在线开放课程1门,出版材料专业教指委规划教材1本,福建省材料专业主干课程教学团队负责人,荣获福建省教学成果特等奖、一等奖各一项,bet356官网手机app教学优秀奖二等奖。多次指导本科生获得中国大学生材料热处理创新创业大赛,互联网+创新创业大赛等国家和省级竞赛一等奖和二等奖。

科研项目

[1] 国家自然科学基金面上项目(52271095)“轻质高强韧铝锂合金析出组织调控及其联合强韧化机理研究”

[2] 国家自然科学基金面上项目(51871057)“高强韧CNTs/Al复合材料仿生构型设计与制备基础研究”

[3] 国家自然科学基金青年基金项目(51501040)“温度场和应变场耦合作用下Al-Zn-Mg-Cu合金时效析出机制研究”。

[5] 福建省自然科学基金青年基金项目(2015J05097)Al-Zn-Mg-Cu合金热-力耦合条件下时效析出机制的第一性原理研究”。

[6] 福建祥鑫股份有限公司横向课题(01802219)“特种铝合金及铝基复合材料、产品研究与开发”

[7] 海洋腐蚀与防护国防重点实验室开放研究基金项目(01801512)“铝合金海洋环境下表面高耐腐蚀微弧氧化复合改性层设计与制备”。

[8] 北京工业大学科研基金(01801702)“航天铝合金薄板TIG焊接工艺开发”。

[9] 哈尔滨工业大学横向课题(01801511)2195铝锂合金蠕变时效行为研究”。

研究领域

1.高性能铝合金及其复合材料的制备与加工;

2.金属材料的变形断裂行为及其计算机模拟;

3.铝合金、镁合金的的腐蚀与防护;

4.燃料电池。

论著成果

以第一作者或通讯作者发表SCI/EI论文30多篇,含高被引论文2篇,以第一发明人获授权发明专利7项,转化专利1项。

(1) Yixi Hou, Zhanjiang Li, Li Chen, Zhongnan Xiang, Pinqiang Dai, Junfeng Chen, SLM Fe50Mn30Co10Cr10 metastable high entropy alloy with Al-Ti addition: Synergizing strength and ductility, Journal of Alloys and Compounds. 2023, 941: 168830

(2) Zhanjiang Li, Jichang He, Xuekun Ding, Guofu Lian, Ming Liu, Junfeng Chen, Pinqiang Dai, Tailoring the surface microstructures and enhancing wear performance of Al0.5CoCrFeNiSi0.25 high-entropy alloys via laser remelting, Surface & Coatings Technology, 2023,452:129129

(3) Zhanjiang Li, Xuekun Ding, Li Chen, Guofu Lian, Ming Liu, Junfeng Chen, Pinqiang Dai, Qunhua Tang, Effect of Si content and annealing temperatures on microstructure, tensile properties of FeCoCrNiMn high entropy alloys, Journal of Alloys and Compounds. 2023, 935: 168090

(4) Junfeng Chen, Laixing Yan, Siyan Liang, Xiping Cui, Chaonong Liu, Remarkable improvement of mechanical properties of layered CNTs/Al composites with Cu decorated on CNTs. Journal of Alloys and Compounds. 2022, 901: 404-415

(5) Junfeng Chen, Cui Liu, Weiwei Ren, Junwei Sun, Synergistic effect of NF and rGO in preparing 3D NiFe-LDH/rGO@NF composites on electrocatalysts performance, Journal of Alloys and Compounds. 2022, 901: 510-520

(6) Li Chen, Zhanjiang Li, Pinqiang Dai , Peixin Fu, Junfeng Chen, Qunhua Tang, Effects of carbon addition on microstructure and mechanical properties of Fe50Mn30Co10Cr10 high-entropy alloy prepared by powder metallurgy, JMR&T, 2022, 20: 73-87

(7) Wenweijiao Wang, Bingbing Shi, Cheng Wang, Chen Wang, Jianhui Zhou, Bingshu Wang, Junfeng Chen, Effects of Sn and Nb Additions on the Corrosion Resistance of Cu-Ni-Si-Mg Alloy, Corrosion, 2022, 78(11): 1048-1057

(8)陈俊锋, 柳超农, 卢锐涵, 王文龙, 汪炳叔, 邹林池, 一维/二维混合碳纳米相增强铝基复合材料的微观组织与力学性能, 中国有色金属学报, 2022, 32(3):800-814

(9) Hao Ding, Xiping Cui, Zhiqi Wang, Yuchen Wang, Yuanyuan Zhang, Hongtao Chen, Lujun Huang, Lin Geng, Junfeng Chen, A new strategy for fabrication of unique heterostructured titanium laminates and visually tracking their synchronous evolution of strain partitions versus microstructure. Journal of Materials Science & Technology. 2022, 107: 70-81

(10) Xiao Zhang, Linchi Zou, Junfeng Chen, Design and Preparation of CNTs/Mg Layered Composites, Materials, 2022, 15: 864-879

(11) Linchi Zou, Jian Pan, Feng Xu, Junfeng Chen, Cu assisted loading of Pt on CeO2 as a carbon-free catalyst for methanol and oxygen reduction reaction, RSC Advances, 2021, 11:36726-36733,

(12) Bingshu Wang, Huimin Liu, Yonggan Zhang, Baoxue Zhou, Liping Deng, Chen Wang, Junfeng Chen, Effect of grain size on twinning behavior of pure titanium at room temperature, Materials Science & Engineering A, 2021, 827:142060,

(13) 邹林池,程佳乐,王文龙,王 晨,汪炳叔,陈俊锋,不同时效态7050铝合金时效成形中析出相对应力松弛行为的影响,稀有金属材料与工程,2021, 50(11): 4095-4102

(14) 梁思琰,任魏巍,林文鑫,邹林池,崔喜平,陈俊锋*,镁合金微弧氧化涂层表面原位制备MgCr-LDH纳米层及其耐蚀防护机理研究,稀有金属材料与工程,2020, 49: 52-60

(15) Junfeng Chen, Siyan Liang , Dianbao Fu , Wenxin Lin ,Weiwei Ren ,Linchi Zou , Design and in situ prepare a novel composite coating on Mg alloy for active anti-corrosion protection. Journal of Alloys and Compounds. 2020, 831: 1-9

(16) Chenglong Zhu, Zhanjiang Li, Pinqiang Dai, Junfeng Chen, Microstructure and mechanical properties of the TiZrNbMoTa refractory high-entropy alloy produced by mechanical alloying and spark plasma sintering. International Journal of Refractory Metals & Hard Materials. 2020, 93: 1-9

(17) 任魏巍,梁思琰,符殿宝,李强,陈俊锋, 铝合金PEO 涂层表面原位制备Mg-Al LDH 膜及其耐蚀性能研究, 表面技术,2020, 49(4): 254-262.

(18) Peng Ye, Jinyi Yao, Bingshu Wang, Huimin Liu, Chen Wang, Junfeng Chen, Qiang Li, A comparative study between {11-22} twinning and {10-12} twinning variant selection mechanisms during uniaxial compression in pure titanium, Materials Characterization, 2020, 162: 1-10.

(19) Bingshu Wang, Jingjing Shi, Peng Ye, Liping Deng, Ning Guo, Chen Wang, Junfeng Chen, Analysis of {10–12} twinning variants’ selection behavior during multi-directional compression in Mg–3Al–1Zn magnesium alloy, Journal of Materials Science. 2019, 54: 9797-9808 

(20) Bingshu Wang, Jingjing Shi, Peng Ye, Liping Deng, Chen Wang, Junfeng Chen, Xiaohua Yang, Qiang Li, In-situ investigation on nucleation and propagation of {10-12} twins during uniaxial multi-pass compression in an extruded AZ31 Mg alloy. Materials Science & Engineering A. 2018, 731:71-79

(21) Junfeng Chen, Wenxin Lin, Shiyan Liang, Linchi Zou, Chen Wang, Binshu Wang, Effect of alloy cations on corrosion resistance of LDH/MAO coating on magnesium alloy. Applied Surface Science. 2019, 463: 535-544

(22) Xiping Cui, Hao Ding, Yuanyuan Zhang, Yao Yao, Guohua Fan, Lujun Huang, Zhenzhu Zheng, Junfeng Chen, Fabrication, microstructure characterization and fracture behavior of a unique micro-laminated TiB-TiAl composites. Journal of Alloys and Compounds. 2019, 775: 1057-1067

(23) 丁浩, 崔喜平, 许长寿, 李爱滨, 耿林, 范国华, 陈俊锋, 连续玄武岩纤维增强铝基层状复合材料的制备与力学特性, 金属学报, 2018, 54: 1171-1178

(24) Shaohua Qin, Xiping Cui, Zhe Tian, Lin Geng, JunFeng Chen, Synthesis and mechanical properties of innovative (TiB/Ti)-Ti3Al micro-laminated composites. Journal of Alloys and Compounds. 2017, 700: 122-129

(25) Chen Wang, Hao Ding, BingShu Wang, Kui Wang, Jingjing Shi, Junfeng Chen, Effects of Deformation Texture and Twins on the Corrosion Resistance of Rolled AZ31 Mg Alloy Under 5% Uniaxial Compression, Acta Metallurgica Sinica, 2017, 30: 921-930

(26) JunFeng Chen, XingFeng Zhan, LinChi Zou, Qiang Li, Effect of precipitate state on the stress corrosion behavior of 7050 aluminum alloy, Materials Characterization, 2016: 114, 1-8.

(27) JunFeng Chen, LinChi Zou, Qiang Li, YuLong Chen, Effect of stress on precipitation behavior of 7xxx alloy during age forming process, Materials Science and Technology, 2016, 32(1): 77-87

发明专利

专利:一种提高7xxx系铝合金综合性能的多级形变时效方法,专利号:ZL 201610968814.3, 授权公告日2018615CN106435417B

专利:一种镁镍水滑石/微弧氧化复合涂层的制备方法,专利号:ZL201810344032.1,授权公告日20191015CN108251839B

专利:一种镁合金镁锰水滑石/微弧氧化复合涂层的制备方法,专利号:ZL201910215153.0,授权公告日2021330 CN109735887B

专利:一种CNTs@TC4复合粉末的快速原位制备方法,专利号:ZL202110853935.4,授权公告日2022816 CN113564559B

专利:一种三维碳纳米相复合增强的铝基材料及其制备方法,专利号:ZL202010888758.9,授权公告日20211102 CN111996418B

专利:一种螺旋形磁性微米马达及其制备方法,专利号:ZL202011262042.4,授权公告日20220412 CN112421988B